DIXON干式快速接头

• 口  径：	DN25-150mm
  颜  色：	金属色
  温  度：	-30C° to +100°C
  材  质：	铝合金，不锈钢，哈氏合金
  特  性：	快速,零泄漏
  认  证：	STANAG 3756
  应用范围：	油墨厂、黏着剂生产厂、脂肪酸、医药、液体清洁剂、石油、化工厂和农用排污等

  ---

   

电子邮箱

QQ在线

打印此页

收藏此页

DIXON干式快速接头

Applications

Dry disconnect couplings are designed for the quick and spill free connection and disconnection of hoses and pipelines. They are used by producers of ink, adhesives, fatty acids, pharmaceuticals, liquid soaps, petroleum, chemicals, agricultural and a wide variety of common caustic and specialty acids.

Construction

Stainless steel ball bearings

All wetted parts are stainless steel

Rollers are Hastelloy C276 on the stainless steel shaft

Specifications

Produced according to NATO standard STANAG 3756 and ATOFINA SGM 2049.TUY.C.

Features

Coupler has built-in swivel

Shaft journal in stainless steel embedded in PTFE to eliminate seizure

The protective ring is a specially formulated, weather resistant and electrically conductive rubber compound

Selectivity- to avoid product contamination, selective versions of the couplers and adapters are available. Contact Dixon for further information.

Easy to handle- push and turn- free flow, turn and pull- closed

Time saving- no need to drain hoses or pipe systems

Economical- no loss or spillage of liquids at connection or disconnection

Safety- the valve cannot be opened until the unit is coupled

Environmental friendly- accidental spillage eliminated when properly used

Safe and reliable- due to rugged construction

Product life- uncomplicated design and high quality materials ensures long product life

Use with composite (Polyeten PE-HD 300) plugs for protection against corrosion; plugs withstand hot and cold environments.

 Compatibility & Interchange Data

Compatible with Mann-Tek, Avery Hardoll and Todo-matic? and any other product produced according to NATO standard STANAG 3756

干式快速接头顾名思义，就是软管连接与断开时全程保持干燥、零泄漏的一种快速高效的快接方式。是专为外溢会造成污染、难于清理、或者对人体或环境有害的介质输送而设计的一种快速连接方式。油墨厂、黏着剂生产厂、脂肪酸、医药、液体清洁剂、石油、化工厂和农用排污等众多领域都有广泛的应用。

干式接头具有以下技术特点：

操作简便 > 一推一转 > 介质流通 > 一推一转 > 断开闭合

节约时间 > 无需排空介质，直接可以操作

无经济损失 > 管道断开连接过程中没有损耗或外溢任何介质

安全保障 > 启闭阀门只有在接头到位后才操作得了，确保了安全性

零污染 > 杜绝了意外飞溅和污染，有效保护了周边环境

运行可靠 > 产品设计合理，结构稳固，运行可靠

使用寿命长 > 精简的设计结构使得产品动作流产，损耗小，材质上乘，有效延长使用寿命

唯一性 > 采用具有唯一性标识的公头，可以有效避免误拿、混淆，污染介质的问题。详情请咨询

生产符合NATO标准STANAG 3756、ATOFINA SGM 2049.TUY.C

工作压力（常规温度70°F条件下）：

铝：4"及以下，建议承压不超过300PSI

黄铜/青铜：4"及以下，建议承压不超过300PSI

不锈钢：建议承压不超过360PSI

可选密封件材质有：EPDM,NBR丁腈橡胶,Kalrez?,Chemraz?,Perlast?

或可选用全套密封件套装