免费咨询

  • 客服: QQ
  • 客服: QQ
  • 13817611782
您好,欢迎来到上海齐晖管业制造技术有限公司
首页 | 关于齐晖 | 联系我们 | 客服热线:021-56203860  | 021-56206297 (9:00-18:00)
客户服务热线021-56203860 
齐晖管业 > 产品中心 > 干式快速接头 > RS TR系列高流量干式快速接头

产品中心

RS TR系列高流量干式快速接头
RS TR系列高流量干式快速接头
  • 口  径:
     DN25-100mm
    颜  色:
     
    温  度:
     -40℃~150℃
    材  质:
     316
    特  性:
     快速,零泄漏
    认  证:
     
    应用范围:
     对泄漏量要求较高的地方

     

 

 

 
Description/产品详情


Roman Seliger (罗曼塞立格) TR系列高流量干式快速接头

The coupling for chemicals and special media requirements Safe transportation of critical media

The TR series couplings are particularly used in processes with hazardous media. Here it is of no importance whether these are liquids, gases or light pasty or highly viscous media – the TR dry disconnect coupling withstands.

To meet the high RS safety standards, the TR couplings, too, are protected by various safety mechanisms thus preventing damage to humans and the environment due to the escape of hazardous media.

The basic principle:

To couple, the female section is placed on the male section and then turned clockwise. The male section is pulled into the female section by means of helical grooves arranged on its outside. After a 10 degree rotation, both halves are permanently connected. Only then a ring-shaped flow channel is opened (“Safety in design”) where the valve positions under spring load axially move relative to the valve seats so that the valve pair is positioned in the extended line diameter of the male section after a twist of overall 120°. The female section is designed in a flow-optimised way due to its exterior components (e.g. springs). During decoupling, the process runs in the reverse sequence. This way, an unintentional media escape can be safely avoided.

 

干式快速接头TR系列

●  极佳的流通性能

●  压降损失小

●  最小化的残留量

●  降低物料损耗

●  保障人员和环境安全

●  精致的几何结构

●  坚固的设计

●  母头集成旋转接头,防止软管扭曲

●  集成机械编码功能,防止不同管线错误连接(选配项)

功能

●  特有的凸轮配合螺旋轨道设计,确保稳固连接

●  通过120°的角度旋转,实现公头端和母头端的连接和断开

●  通过弹簧势能控制轴向截止阀来实现接头的机械密封

●  以"安全设计理念" 防止物料泄漏, 对接时先密闭公母端后打开阀门;断开连接时先关闭其中的阀门,后实现公母端分离

●  母头端充分优化流量,所有运动部件(比如弹簧)设计在流通横截面的外围

 

尺寸

材质

密封件

压力

末端接口

1" ~ 4"   (DN   25~DN 100), 其他可按要求定制

不锈钢1.4571/1.4401, 助力手轮 (TRM 40 ~100) 聚丙烯, 其他可按要求定制

螺纹密封: PTFEO型圈: FPM, EPDM, FFKM, NBR, 其他可按要求定制

工作压力PN 25, 最大可操作压力大约为 6 bar

BSP内螺纹(1" ~ 4")DIN, ISO 或者ASA 法兰, 其他可按要求定制

 

TR.jpg

硅胶软管
金属软管
橡胶软管
膨胀节
复合软管
特氟龙软管
特氟龙软管
食品级软管
塑料软管
干式快速接头


免费咨询

  • 客服: QQ
  • 客服: QQ
  • 13817611782