免费咨询

  • 客服: QQ
  • 客服: QQ
  • 13817611782
您好,欢迎来到上海齐晖管业制造技术有限公司
首页 | 关于齐晖 | 联系我们 | 客服热线:021-56203860  | 021-56206297 (9:00-18:00)
客户服务热线021-56203860 
齐晖管业 > 产品中心 > 拉断阀 > RS拉绳式拉断阀ABV-S型

产品中心

RS拉绳式拉断阀ABV-S型
RS拉绳式拉断阀ABV-S型
  • 口  径:
     DN25-300mm
    颜  色:
     
    温  度:
     
    材  质:
     316
    特  性:
     
    认  证:
     
    应用范围:
     食品、医药、化工、船厂

     

 

 

 
Description/产品详情


Roman Seliger(罗曼塞立格)钢丝绳拽动式拉断阀ABV-S型

The compact breakaway coupling series with distance-controlled triggering (patented!)

The solution to exclude any tensile load on the loading line

The ABV-S series was developed for loading processes where the traditional load-limited breakaway couplings (see ABV and ABVL series) cannot be used. This particularly applies to applications where tensile forces must not at all or may only be marginally applied on the loading line.

ABV-S series breakaway couplings separate the line when the mobile unit exceeds a pre-set radius of motion. The radius of motion should be smaller than the maximum deflection of the loading line. Both coupling halves are equipped with a non-return valve each that allows to close the line impermeably when it is separated and to exclude that the medium escapes into the environment.

The basic principle:

Compared with load-limited triggering (see ABV and ABVL series), the ABV-S series triggers without any stress on the loading line via a load cable that limits the radius of motion of the mobile unit. The trigger mechanism actuated via the cable is patented and has set the standard in this product segment for years!

The ABV-S series couplings consist of two coupling halves. These are connected via a pair of flanges by means of a patented clamp/supporting ring system during normal operation. The supporting ring is connected to a rope that has to be attached to the stationary unit in a way that it is always shorter than the loading line independent of the direction of motion of the mobile loading partner.

When exceeding the radius of motion thus defined, the cable tightens, pulls the supporting ring from the clamp/supporting ring system thus loosening the connection between the two coupling halves. In this case, the separated coupling halves must be closed immediately; for this purpose the two housing halves are equipped with spring-loaded non-return valves. In the operating state, they brace each other and keep the flow cross-section open. In the case of separation the mutual support effect of the valves no longer exists so that they abruptly close each cross section being released.

For example, at a loading station equipped with a hose loading arm, the "release cord" is attached at a suitable point by means of a load cable anchor. In case of emergency, the coupling immediately separates the line – without causing damage to the hose, coupling, vehicle or loading plants. At both sectioning points, the valves in the safety couplings abruptly close so that no medium can escape.

 

ABV-S型拉断阀用来保障槽罐车、铁路槽运、船对岸之间物料装卸的安全。其机械原理是:设置一根钢丝绳,沿着软管或者鹤管装车移动的方向,一端系在拉断阀上,另一端固定在地坪或者较粗管道上,钢丝绳的极限伸展长度一定要比软管或者鹤管的极限长度短,从而在车船意外移动时,保证钢丝绳提前管线绷紧,在流体管路受力前触发拉断阀,拉断阀分离为两部分,分离截面瞬间关闭,避免泄漏事故发生。

应用领域

●  化工行业

●  食品行业

●  电厂

●  造船厂                       

●  储油罐区

●  槽车运输


ABVS1.jpg

硅胶软管
金属软管
橡胶软管
膨胀节
复合软管
特氟龙软管
特氟龙软管
食品级软管
塑料软管
干式快速接头


免费咨询

  • 客服: QQ
  • 客服: QQ
  • 13817611782