免费咨询

  • 客服: QQ
  • 客服: QQ
  • 13817611782
您好,欢迎来到上海齐晖管业制造技术有限公司
首页 | 关于齐晖 | 联系我们 | 客服热线:021-56203860  | 021-56206297 (9:00-18:00)
客户服务热线021-56203860 
齐晖管业 > 产品中心 > 拉断阀 > RS超低温拉断阀ABVC型

产品中心

RS超低温拉断阀ABVC型
RS超低温拉断阀ABVC型
  • 口  径:
     DN25-100mm
    颜  色:
     
    温  度:
     -190℃~110℃
    材  质:
     316
    特  性:
     零泄漏
    认  证:
     
    应用范围:
     液氧、液氮、液氩、液化天然气(LNG)、液态甲烷、低温乙烯等超低温气体、液体

     

 

 

 
Description/产品详情


Roman Seliger(罗曼塞立格)超低温拉断阀ABVC型

The breakaway coupling with low temperature properties and load-limited triggering via breaking pins

The solution for cryogenic media

The ABVC series was particularly developed for low temperature applications / cryogenics and provides high flow rate at the usual RS safety standard. As well as ensuring compliance with the corresponding leak rates, using our breakaway coupling provides protection across the entire temperature range from -196 °C to 60 °C.

The ABVC series breakaway couplings separate the line at a defined tensile load. This should be selected with a sufficient safety margin below the load limit of the line, such as the maximum tensile load of a hose line. Both coupling halves are equipped with a non-return valve each that allows to close the line impermeably when it is separated and to exclude that the medium escapes into the environment.

The basic principle:

The ABVC series couplings consist of two almost identical coupling halves. These are connected via a pair of flanges by means of three breaking pins during normal operation. The flanged connection has no overlaps, so tensile forces acting on the line are directly transmitted to the breaking pins. The ABVC function is available without limitation of the load angle. When pure axial load is applied, the tensile force is distributed evenly to all three pins so that the threshold for triggering is the highest here. However, when lateral tensile forces are applied, the load is distributed unevenly to the breaking pins; the load increases with the size of the angle to the coupling axis. The load then increasingly focuses on one or max. two pins, so that the planned separation takes place at a lower threshold value.

If their tensile strength is exceeded, the pins break and the flanged connection is loosened. In this case, the separated coupling halves must be closed immediately; for this purpose the two housing halves are equipped with spring-loaded non-return valves. In the operating state, they brace each other and keep the flow cross-section open. In the case of separation the mutual support effect of the valves no longer exists so that they abruptly close each cross section being released.

 

罗曼塞立格ABVC超低温拉断阀, 适用与-196℃到+110℃的介质输送。

RS安全低温拉断阀,在德国最严格的Cryogenic低温实验室进行全方位的测试,它利用业界最新的RS-SELIGER瓣阀,这种阀有很多独特的优势,包括低压降、轻便的紧凑设计、防止部分拉断以导致的泄露。罗曼塞立格ABVC系列低温安全拉断阀可应用于零下196摄氏度的场合。

 

适用物料:

液氧、液氮、液氩、液化天然气(LNG)、液态甲烷、低温乙烯等超低温气体、液体

 

应用领域:

其特有的低温密封技术确保拉断阀在常温和低温都能发挥作用,目前ABVC型在LNG液化天然气、液氧、液氮、液氩、低温乙烯、低温二氧化碳等低温介质中均有应用,同时ABVC型拉断阀是业界流速领先的低温拉断阀。其高等级的 耐低温 不锈钢阀体材质配合稳定的密封组件能确保在极寒的情况下运行自如。


csm_ABVC_Spiegelung_ab49214d92.jpg

硅胶软管
金属软管
橡胶软管
膨胀节
复合软管
特氟龙软管
特氟龙软管
食品级软管
塑料软管
干式快速接头


免费咨询

  • 客服: QQ
  • 客服: QQ
  • 13817611782